u.P.V.C. Frequently Asked Questions (FAQ)

QWhy should I use uPVC windows and doors rather than Aluminium or timber?

AuPVC has been extensively used in the building industry around the world for many years, and is an ideal product for this application.

QWhat are the advantages of uPVC windows & doors?

AuPVC will not rot or corrode making it ideal for all areas especially coastal applications. It is virtually maintenance free, requires no painting or treatment.

QI live on a busy main road can your windows reduce the traffic noise?

AYES. Our window system is designed for a double glazed unit, and with certain glass configurations we can achieve Sound Transmission Class (STC) ratings of 44. We have installed our system into many buildings both domestic and commercial in order to alleviate noise problems such as road and aircraft noise.

QThe Australian climate can be very harsh. How will this affect uPVC?

ARehau, the manufacturer of the extrusion, have had their product on test in the Arizona Dessert for over 20 years. Their product is resistant to ultra violet and is specially formulated to suit the Australian climate.

QWhere are the uPVC windows made?

AThe windows and doors are fabricated in our factory in Brisbane. The uPVC extrusion we use is manufactured by Rehau, a German based company with extrusion plants throughout the world.

QWhat colours are available?

AIt is a known fact that colour will fade in harsh conditions, which will effect powder coated and painted surfaces over time. Our windows and doors are coloured white throughout and are colour fast.

QCan I fit the windows myself?

AThe windows and doors arrive on site complete and ready to install. However, as a responsible company we offer a ten year guarantee on our products and installation. We could not offer a similar guarantee if the installation was not completed by an approved installer. Should you wish to carry out your own installation, then we will supply fitting instructions.

QAre uPVC windows available in the same style as aluminium and timber?

AThere are very few limitations when using uPVC, in most cases we can use our systems to create the same style as aluminium or timber systems. We also have our own innovative designs, which are constantly being updated. The usual styles, casement, awning, tilt and turn, fixed and sliders are all available using our uPVC system.

QWill the windows withstand the cyclonic conditions that sometimes occur in Australia?

AAll our windows and doors have been tested to conform to Australian Standards and Rehau are continually testing and improving their products to meet the standards and conditions as appropriate.

QDo you offer a guarantee?

ASignature Windows® offer a ten year guarantee on uPVC windows and doors.

QDo you supply and install your windows anywhere in Australia?

AOur manufacturing base is in Brisbane, however, we supply and install in all States of Australia.

QI will need 7 windows and 2 doors. How long will it take to make and install them?

AThe turn around time from receiving a typical order would be 3 – 4 weeks from receipt of confirmed order to completion of installation.

QWhat type of glazing do you offer with your systems?

AThe Rehau profile is extruded to accept a glazing panel up to 30mm, so virtually any combination of single or double glazing can be used without any design change. We can also supply a whole range of coated, tinted and bullet proof glass.

QCan I replace my existing windows with your uPVC systems?

AOur uPVC windows and doors are ideal as replacement, or for new-build projects.

« Technical Data